Utah Administrative Code
Topic - Public Safety
Title R714 - Highway Patrol
Rule R714-162 - Equipment Standards for Heavy Motor Vehicle, Trailer and Bus Safety Inspections
Section R714-162-6 - Inspection Procedures

Universal Citation: UT Admin Code R 714-162-6

Current through Bulletin 2024-06, March 15, 2024

(1) The inspector shall complete the following tasks prior to inspecting the vehicle:

(a) collect appropriate registration paperwork;
(i) _a vehicle may be inspected without registration paperwork;

(b) verify the Vehicle Identification Number;

(c) record the owner's full name and vehicle information;

(d) record the vehicle mileage;

(e) remove the old inspection sticker; and

(f) enter the inspection date and inspector number if using a paper inspection certificate.

(2) The inspector shall examine the vehicle's interior by completing the following tasks:

(a) inspect the windshield;

(b) inspect the required mirrors for adequate visibility;

(c) inspect the seatbelts for proper operation;

(d) inspect the steering system;

(e) inspect for play in the brake pedal;

(f) inspect the emergency brake for proper operation;

(g) inspect the horn;

(h) inspect the windshield wiper and washer; and

(i) inspect heater and defroster.

(3) The inspector shall examine the vehicle's exterior by completing the following tasks:

(a) inspect high and low beam headlights;

(b) inspect headlights for proper aim;

(c) inspect parking lights, tail lights, signal lights, brake lights, marker lights, and reflectors;

(d) inspect the light for proper color;

(e) inspect the tires for proper inflation, wear, and damage;

(f) inspect the body, fenders, door, hood latches, and bumpers;

(g) inspect for broken glass; and

(h) inspect the window tinting by measuring the light transmittance on the front side windows and windshield.

(4) The inspector shall examine items under the vehicle's hood by completing the following tasks:

(a) inspect belts;

(b) inspect hoses;

(c) inspect power steering pump;

(d) inspect wiring;

(e) inspect the exhaust manifold;

(f) inspect the master cylinder;

(g) inspect for fuel leaks; and

(h) inspect the air compressor.

(5) The inspector shall examine the vehicle's suspension and undercarriage by completing the following tasks:

(a) inspect wheel bearings;

(b) inspect ball joints;

(c) inspect tie rod ends;

(d) inspect idler arms;

(e) inspect shock absorbers;

(f) inspect springs;

(g) inspect the exhaust system;

(h) inspect floor pans; and

(i) inspect fuel system lines.

(6) The inspector shall examine the braking system by completing the following tasks:

(a) inspect for loose or missing lug nuts;

(b) inspect for cracked wheels;

(c) inspect pads or shoes;

(d) inspect rotors or drums;

(e) record the brake measurements on the safety inspection sticker report;

(f) inspect for fluid leaks; and

(g) inspect brake hoses.

(7) If the vehicle passes inspection, the inspector shall:

(a) sign the sticker report; and

(b) apply the new sticker to the inspected vehicle.

Disclaimer: These regulations may not be the most recent version. Utah may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.