Utah Administrative Code
Topic - Public Safety
Title R708 - Driver License
Rule R708-48 - Ignition Interlock System Program
Section R708-48-3 - Definitions
Universal Citation: UT Admin Code R 708-48-3
Current through Bulletin 2024-06, March 15, 2024
(1) Terms used in this rule are defined in Sections 41-6a-518, 53-3-102, 53-3-1002, and R708-31-3.
(2) In addition:
(a) "act of moral turpitude" means conduct
which:
(i) is done knowingly contrary to
justice, honesty, or good morals;
(ii) has an element of falsification, fraud,
or deception; or
(iii) contains an
element of harm or injury directed to another person or another's
property;
(b) "business"
means a service center;
(c)
"client" means the named person on the ignition interlock system
contract;
(d) "ignition interlock
system activities" means installation, inspection, monitoring, service, and
removal of the system, but does not include internal system repair;
(e) "removal" means the removal of a
system;
(f) "service center" means
a physical location designated by the manufacturer, and approved by the
division, where systems are installed, inspected, monitored, calibrated,
maintained, and removed; and
(g)
"service interval" means the time between system monitoring.
Disclaimer: These regulations may not be the most recent version. Utah may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
