Utah Administrative Code
Topic - Public Safety
Title R708 - Driver License
Rule R708-37 - Certification of Licensed Instructors of Commercial Driver Training Schools or Testing Only Schools to Administer Driving Skills Test
Section R708-37-5 - Tester Restrictions

Universal Citation: UT Admin Code R 708-37-5

Current through Bulletin 2024-06, March 15, 2024

(1) A tester may not administer a test to a student who:

(a) took the driver training course at the same school the tester is employed as an instructor; or

(b) took the driver training course at a school that is owned completely or partially by an individual or individuals who have any ownership in the school the tester is employed as an instructor.

(2) A student who fails the test given by a tester may:

(a) apply to the same tester for additional testing;

(b) apply to a different tester for additional testing; or

(c) take the test at a division office.

(3) A tester may not make any changes to a testing route without earlier written approval by the division.

(4) A tester shall not employ an employee of the division as a tester.

(5) A tester shall not use or do anything that may distract their attention away from the test. For example, use of phones or other electronic devices.

(6) A tester may not test an individual who has been required by the division to take a driver review exam.

(7) A tester may not test an individual who has been required by the division to take additional hours of driving instruction.

(8) The tester shall administer at least ten tests per calendar year. If the tester fails to meet this requirement:

(a) the division will cancel the tester license in accordance with Section R708-37-7;

(b) the tester must return any unused test forms; and

(c) reinstatement following cancellation of certification shall consist of completing an approved training plan and completing an application for a new certification outlined in Section R708-37-4.

(9) A tester may not test an individual who has previously taken a test on the same day.

(10) Before administering a test, the tester shall:

(a) screen the student's learner permit or receipt for medical or visual restrictions; and

(b) verify that the student is in compliance with any restrictions.

Disclaimer: These regulations may not be the most recent version. Utah may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.