Utah Administrative Code
Topic - Natural Resources
Title R657 - Wildlife Resources
Rule R657-9 - Taking Waterfowl, Snipe and Coot
Section R657-9-5 - Tagging Tundra Swans
Universal Citation: UT Admin Code R 657-9-5
Current through Bulletin 2024-18, September 15, 2024
(1)
(a) A person that takes a tundra swan must
tag the carcass, as provided in Section
23-20-30, immediately upon taking
possession of the carcass and reaching a location listed in Subsections (i)
through (iii), that is closest to the place where the carcass was first
retrieved by the hunter, another person, or a dog:
(i) the blind or fixed location in the field
where the person taking the tundra swan was set up and from where they shot at
the tundra swan;
(ii) a vessel
available to the person; or
(iii)
the first area of land free from standing water.
(b) "Vessel" means, for the purposes of this
subsection, any type of watercraft used or capable of being used as a means of
transportation on water.
(2) To tag a tundra swan carcass, a person shall:
(a) completely detach the tag from the
license or permit;
(b) completely
remove the appropriate notches to correspond with the date the tundra swan was
taken; and
(c) attach the tag to
the tundra swan carcass so that the tag remains securely fastened and
visible.
(3) A person may not:
(a) remove more than one notch indicating
the date; or
(b) tag more than one
tundra swan carcass using the same tag.
(4) A person may not hunt or pursue a tundra swan after:
(a) shooting and retrieving the
tundra swan;
(b) the tag is
detached from the permit; or
(c)
any of the notches have been removed from the tag.
Disclaimer: These regulations may not be the most recent version. Utah may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
