Utah Administrative Code
Topic - Natural Resources
Title R655 - Natural Resources, Water Rights
Rule R655-11 - Requirements for the Design, Construction and Abandonment of Dams
Section R655-11-10B - Survey Markers and Bench Marks
Universal Citation: UT Admin Code R 655-11-10B
Current through Bulletin 2024-18, September 15, 2024
All moderate and high hazard dams shall have permanent survey markers on the crest of the dam to monitor vertical and horizontal movement. The survey markers should be located to prevent damage from traffic. In conjunction with the survey markers a permanent bench mark shall be installed on each abutment, sufficiently removed from the dam so any effects of the dam movement will not be felt at the bench mark. Reference markers should be established so the bench mark can be reset in the event of damage. Spacing of survey markers should not exceed 200 feet and spacing should be decreased as the height of the dam increases.
Disclaimer: These regulations may not be the most recent version. Utah may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.