Utah Administrative Code
Topic - Natural Resources
Title R647 - Oil, Gas and Mining; Non-Coal
Rule R647-3 - Small Mining Operations
Section R647-3-105 - Project Location and Map
Universal Citation: UT Admin Code R 647-3-105
Current through Bulletin 2024-18, September 15, 2024
The notice of intention shall include a location map and an operations map. Each map shall be plotted at a scale to accurately identify locational landmarks and operations details.
1. The general location map shall be the scale of a USGS 7.5 minute series map or equivalent (1" = 2000') and identify new or existing access roads.
2. The operations map (1" = 200' or other scale as determined necessary by the Division) shall identify:
2.11. The area to
be disturbed;
2.12. The location of
any existing or proposed operations including access roads, drill holes,
trenches, pits, shafts, cuts, or other planned small mining activities;
and
2.13. Any adjacent previous
disturbance for which the operator is not responsible.
Disclaimer: These regulations may not be the most recent version. Utah may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
