Utah Administrative Code
Topic - Labor Commission
Title R616 - Boiler, Elevator and Coal Mine Safety
Rule R616-3 - Elevator Rules
Section R616-3-9 - Valves in Hydraulic Elevator Operating Fluid Systems
Universal Citation: UT Admin Code R 616-3-9
Current through Bulletin 2024-24, December 15, 2024
A. Due to the potential loss of pressure retaining capability when over torqued, bronze-bodied valves shall not be installed in the hydraulic systems of a hydraulic elevator.
B. This requirement is in effect for all new installations and remodel installations involving the hydraulic system.
C. If a bronze-bodied valve installed on an existing elevator begins to leak, that valve shall be replaced by a steel-bodied valve.
Disclaimer: These regulations may not be the most recent version. Utah may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
