Utah Administrative Code
Topic - Labor Commission
Title R616 - Boiler, Elevator and Coal Mine Safety
Rule R616-2 - Boiler and Pressure Vessel Rules
Section R616-2-4 - Quality Assurance for Boilers, Pressure Vessels and Power Piping

A. Consistent with the requirements of the Commission and its predecessor agency since May 1, 1978, all boilers and pressure vessels installed on or after May 1, 1978 shall be registered with the National Board and the data plate must include the National Board number.

B. Pursuant to Section 34A-7-102(2), any boiler or pressure vessel of special design must be approved by the Division to ensure it provides a level of safety equivalent to that contemplated by the Boiler and Pressure Vessel Code of the ASME. Any such boiler or pressure vessel must thereafter be identified by a Utah identification number provided by the Division.

C. All steam piping, installed after May 1, 1978, which is external (from the boiler to the first stop valve for a single boiler and the second stop valve in a battery of two or more boilers having manhole openings) shall comply with Section 1 of the ASME Boiler and Pressure Vessel Code or ASME B31.1 Power Piping as applicable.

D. Nonstandard boilers or pressure vessels installed in Utah before July 1, 1999 may be allowed to continue in operation provided the owner can prove the equivalence of its design to the requirements of the ASME Boiler and Pressure Vessel Code. Nonstandard boilers or pressure vessels may not be relocated or moved.

E. Effective July 1, 1999, all boiler and pressure vessel repairs or alterations must be performed by an organization holding a valid Certificate of Authorization to use the "R" stamp from the National Board. Repairs to pressure relief valves shall be performed by an organization holding a valid Certificate of Authorization to use the "VR" stamp from the National Board.