Utah Administrative Code
Topic - Health
Title R432 - Health Care Facility Licensing
Rule R432-4 - General Construction
Section R432-4-9 - New Construction, Additions and Remodeling

Universal Citation: UT Admin Code R 432-4-9

Current through Bulletin 2024-06, March 15, 2024

(1) New construction, additions and remodels to existing structures, shall comply with Department rules in effect on the date the schematic drawings are submitted to the Department.

(2) If the remodeled area or addition in any building, wing, floor or service area of a building exceeds 50 percent of the total square foot area of the building, wing, floor or service area, then the entire building, wing, floor or service area shall be brought into compliance with adopted codes and rules governing new construction which are in effect on the date the schematic drawings are submitted to the Department.

(3) During remodeling and new construction, the licensee must maintain the safety level which existed prior to the start of work.

Disclaimer: These regulations may not be the most recent version. Utah may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.