Utah Administrative Code
Topic - Health
Title R392 - Population Health, Environmental Health
Rule R392-700 - Indoor Tanning Facility Sanitation
Section R392-700-8 - Construction and Maintenance Requirements
Universal Citation: UT Admin Code R 392-700-8
Current through Bulletin 2024-06, March 15, 2024
The operator shall ensure that:
(1) a restroom is provided for patron use that includes:
(a) a flushing toilet;
(b) a handwashing sink with hot
and cold running water; and
(c)
hand soap and single use hand drying towels or a hand drying mechanism;
(2) each floor and wall in the toilet room and handwashing area is constructed of smooth, non-absorbent material;
(3) each tanning facility area is properly ventilated;
(4) the internal ambient air temperature of the facility does not exceed 85 degrees F;
(5) each tanning facility room is capable of being illuminated to allow for proper cleaning and sanitizing; and
(6) the floor adjacent to each tanning device is clean and slip resistant to allow for safe entry and exit from the tanning device.
Disclaimer: These regulations may not be the most recent version. Utah may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
