Utah Administrative Code
Topic - Health
Title R392 - Population Health, Environmental Health
Rule R392-402 - Manufactured Home Community Sanitation
Section R392-402-5 - Water Supply

Universal Citation: UT Admin Code R 392-402-5

Current through Bulletin 2023-24, December 15, 2023

(1) Potable water supply systems for use by manufactured home community occupants shall be designed, installed, and operated according to the requirements set forth by:

(a) Plumbing Code;

(b) The Utah Department of Environmental Quality, Division of Drinking Water under Title R309; and

(c) Local health department regulations.

(2) The operator shall provide a potable water connection to each manufactured home space.

(a) Shut-off valves on water connections for individual manufactured homes shall be of the inverted key pattern stop-and-waste type or an approved anti-siphon yard hydrant.

(3) Plumbing fixtures that normally require water for their operation shall be supplied with adequate potable water supply under pressure.

(4) The operator shall provide hot and cold running water under pressure at each service building for showers or bath fixtures, hand sinks, and laundry facilities when provided.

(5) A manufactured home community in which spaces are set aside for vehicles, manufactured homes, or other temporary dwellings not provided with toilet, sink, and bathing plumbing fixtures, as in R392-402-4(6), shall be provided with a common-use, non-threaded water faucet or spigot that shall be accessible to community occupants.

Amended by Utah State Bulletin Number 2018-12, effective 5/24/2018

Disclaimer: These regulations may not be the most recent version. Utah may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.