Utah Administrative Code
Topic - Health
Title R392 - Population Health, Environmental Health
Rule R392-303 - Public Geothermal Pools and Bathing Places
Section R392-303-20 - Inlets
Universal Citation: UT Admin Code R 392-303-20
Current through Bulletin 2024-06, March 15, 2024
(1) The operator shall ensure that a geothermal pool or geothermal bathing place that has pumped flow meets the inlet requirements of Section R392-302-17.
(2)
(a) If
a geothermal pool or geothermal bathing place that has gravity flow inlets
cannot meet the requirements of Section
R392-302-17, the operator shall
demonstrate to a local health officer that the inlet system provides uniform
distribution of fresh water throughout the geothermal pool or geothermal
bathing place.
(b) The operator may
demonstrate uniform distribution by either:
(i) computer simulation; or
(ii) a dye test witnessed by a local health
officer.
Disclaimer: These regulations may not be the most recent version. Utah may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
