Utah Administrative Code
Topic - Environmental Quality
Title R315 - Waste Management and Radiation Control, Waste Management
Rule R315-310 - Permit Requirements for Solid Waste Facilities
Section R315-310-5 - Contents of a Permit Application for a New or Expanding Class III, IV, or VI Landfill
Universal Citation: UT Admin Code R 315-310-5
Current through Bulletin 2024-06, March 15, 2024
(1) Each application for a permit for a new Class III, IV, or VI landfill or for a permit to expand an existing Class III, IV, or VI Landfill shall contain the information required in Section R315-310-3.
(2) Each application shall also contain an engineering report, plans, specifications, and calculations that address:
(a) the information and maps required by
Subsections
R315-310-4(2)(a)(i)
and (ii);
(b) the design and location of the run-on and
run-off control systems;
(c) the
information required by Subsections
R315-310-4(2)(d)
and (e);
(d) the area to be served by the facility;
and
(e) how the facility will meet
the requirements of Rule R315-304, for a Class III Landfill, or Rule R315-305,
for a Class IV or VI Landfill.
(3) Each application for a Class IIIa or Class IVa Landfill permit shall also contain the applicable information required in Subsections R315-310-4(2)(b)and (c).
Disclaimer: These regulations may not be the most recent version. Utah may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
