Utah Administrative Code
Topic - Environmental Quality
Title R315 - Waste Management and Radiation Control, Waste Management
Rule R315-270 - Hazardous Waste Permit Program
Section R315-270-24 - Hazardous Waste Permit Program - Specific Part B Information Requirements for Process Vents
Current through Bulletin 2024-06, March 15, 2024
Except as otherwise provided in Section R315-264-1, owners and operators of facilities that have process vents to which Sections R315-264-1030 through 1036 applies shall provide the following additional information:
(a) For facilities that cannot install a closed-vent system and control device to comply with the provisions of Sections R315-264-1030 through 1036 on the effective date that the facility becomes subject to the provisions of Sections R315-264-1030 through 1036 or 40 CFR 265.1030 through 1035, which are adopted by reference, an implementation schedule as specified in Subsection R315-264-1033(a)(2).
(b) Documentation of compliance with the process vent standards in Section R315-264-1032, including:
(c) Where an owner or operator applies for permission to use a control device other than a thermal vapor incinerator, catalytic vapor incinerator, flare, boiler, process heater, condenser, or carbon adsorption system to comply with the requirements of Section R315-264-1032, and chooses to use test data to determine the organic removal efficiency or the total organic compound concentration achieved by the control device, a performance test plan as specified in Subsection R315-264-1035(b)(3).
(d) Documentation of compliance with Section R315-264-1033, including: