Utah Administrative Code
Topic - Environmental Quality
Title R315 - Waste Management and Radiation Control, Waste Management
Rule R315-270 - Hazardous Waste Permit Program
Section R315-270-17 - Hazardous Waste Permit Program - Specific Part B Information Requirements for Surface Impoundments
Current through Bulletin 2024-06, March 15, 2024
Except as otherwise provided in Section R315-264-1, owners and operators of facilities that store, treat or dispose of hazardous waste in surface impoundments shall provide the following additional information:
(a) A list of the hazardous wastes placed or to be placed in each surface impoundment;
(b) Detailed plans and an engineering report describing how the surface impoundment is designed and is or will be constructed, operated, and maintained to meet the requirements of Section R315-264-19 and Sections R315-264-221thRough 223, addressing the following items:
(c) A description of how each surface impoundment, including the double liner system, leak detection system, cover system, and appurtenances for control of overtopping, will be inspected in order to meet the requirements of Subsections R315-264-226(a), (b), and (d). This information shall be included in the inspection plan submitted under Subsection R315-270-14(b)(5);
(d) A certification by a qualified engineer which attests to the structural integrity of each dike, as required under Subsection R315-264-226(c). For new units, the owner or operator shall submit a statement by a qualified engineer that he will provide such a certification upon completion of construction in accordance with the plans and specifications;
(e) A description of the procedure to be used for removing a surface impoundment from service, as required under Subsections R315-264-227(b) and (c). This information should be included in the contingency plan submitted under Subsection R315-270-14(b)(7);
(f) A description of how hazardous waste residues and contaminated materials will be removed from the unit at closure, as required under Subsection R315-264-228(a)(1). For any wastes not to be removed from the unit upon closure, the owner or operator shall submit detailed plans and an engineering report describing how Subsections R315-264-228(a)(2) and (b) will be complied with. This information should be included in the closure plan and, where applicable, the post-closure plan submitted under Subsection R315-270-14(b)(13);
(g) If ignitable or reactive wastes are to be placed in a surface impoundment, an explanation of how Section R315-264-229 will be complied with;
(h) If incompatible wastes, or incompatible wastes and materials will be placed in a surface impoundment, an explanation of how Section R315-264-230 will be complied with.
(i) A waste management plan for EPA Hazardous Waste Nos. FO20, FO21, FO22, FO23, FO26, and FO27 describing how the surface impoundment is or will be designed, constructed, operated, and maintained to meet the requirements of Section R315-264-231. This submission shall address the following items as specified in Section R315-264-231:
(j) Information on air emission control equipment as required in Section R315-270-27.