Utah Administrative Code
Topic - Environmental Quality
Title R315 - Waste Management and Radiation Control, Waste Management
Rule R315-261 - General Requirements - Identification and Listing of Hazardous Waste
Section R315-261-1090 - Appendix I to Rule R315-261 - Representative Sampling Methods

Universal Citation: UT Admin Code R 315-261-1090
Current through Bulletin 2024-06, March 15, 2024

The methods and equipment used for sampling waste materials will vary with the form and consistency of the waste materials to be sampled. Samples collected using the sampling protocols listed below, for sampling waste with properties similar to the indicated materials, shall be considered by the Agency to be representative of the waste.

Extremely viscous liquid-ASTM Standard D140-70 Crushed or powdered material-ASTM Standard D346-75 Soil or rock-like material-ASTM Standard D420-69 Soil-like material-ASTM Standard D1452-65

Fly Ash-like material-ASTM Standard D2234-76, ASTM Standards are available from ASTM, 1916 Race St., Philadelphia, PA 19103

Containerized liquid waste-"COLIWASA."

Liquid waste in pits, ponds, lagoons, and similar reservoirs-"Pond Sampler."

This manual also contains additional information on application of these protocols.

Disclaimer: These regulations may not be the most recent version. Utah may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.