Utah Administrative Code
Topic - Environmental Quality
Title R315 - Waste Management and Radiation Control, Waste Management
Rule R315-261 - General Requirements - Identification and Listing of Hazardous Waste
Section R315-261-1054 - Air Emission Standards: Pressure Relief Devices in Gas/Vapor Service
Universal Citation: UT Admin Code R 315-261-1054
Current through Bulletin 2024-06, March 15, 2024
(a) Except during pressure releases, each pressure relief device in gas/vapor service shall be operated with no detectable emissions, as indicated by an instrument reading of less than 500 ppm above background, as measured by the method specified in Subsection R315-261-1063(c).
(b)
(1)
After each pressure release, the pressure relief device shall be returned to a
condition of no detectable emissions, as indicated by an instrument reading of
less than 500 ppm above background, as soon as practicable, but no later than 5
calendar days after each pressure release, except as provided in Section
R315-261-1059.
(2) No later than 5 calendar days after the
pressure release, the pressure relief device shall be monitored to confirm the
condition of no detectable emissions, as indicated by an instrument reading of
less than 500 ppm above background, as measured by the method specified in
Subsection
R315-261-1063(c).
(c) Any pressure relief device that is equipped with a closed-vent system capable of capturing and transporting leakage from the pressure relief device to a control device as described in Section R315-261-1060 is exempt from the requirements of Subsection R315-261-1054(a) and (b).
Disclaimer: These regulations may not be the most recent version. Utah may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
