Utah Administrative Code
Topic - Environmental Quality
Title R313 - Waste Management and Radiation Control, Radiation
Rule R313-16 - General Requirements Applicable to the Installation, Registration, Inspection, and Use of Radiation Machines
Section R313-16-280 - Out-of-State Radiation Machines

Universal Citation: UT Admin Code R 313-16-280

Current through Bulletin 2024-06, March 15, 2024

(1) Whenever a radiation machine is to be brought into the state, for either temporary or extended use, the person proposing to bring the machine into the state shall give written notice to the Director at least three working days before the machine is to be used in the state. The notice shall include the type of radiation machine; the manufacturer model and serial number of the master control; the nature, duration, and scope of use; and the exact location where the radiation machine is to be used. If, for a specific case, the three working-day period would impose an undue hardship, the person may, upon application to the Director, obtain permission to proceed sooner.

(2) In addition, the out-of-state person shall:

(a) comply with the applicable portions of these rules;

(b) supply the Director other information as the Director requests.

Disclaimer: These regulations may not be the most recent version. Utah may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.