Utah Administrative Code
Topic - Environmental Quality
Title R309 - Drinking Water
Rule R309-550 - Facility Design and Operation: Transmission and Distribution Pipelines
Section R309-550-11 - Service Connections and Plumbing
Universal Citation: UT Admin Code R 309-550-11
Current through Bulletin 2024-06, March 15, 2024
(1) Service Taps.
Service taps shall not jeopardize the quality of the system's water.
(2) Plumbing.
(a) Water services and plumbing shall conform
to the State-adopted Plumbing Code.
(b) Pipes and pipe fittings installed after
January 4, 2014, shall be "lead-free" in accordance with Section 1417 of the
federal Safe Drinking Water Act. They shall be certified meeting the ANSI/NSF
372 or Annex G of ANSI/NSF 61.
(3) Individual Home Booster Pumps.
Individual booster pumps shall not be allowed for any individual service from the public water supply mains. Exceptions to the rule may be granted by the Director if it can be shown that the granting of such an exception will not jeopardize the public health.
(4) Service Lines.
(a) Service lines shall be capped until
connected for service.
(b) The
portion of the service line under the control of the water system is considered
to be part of the distribution system.
(5) Service Meters and Building Service Line.
Connections between the service meter and the home shall be in accordance with the State-adopted Plumbing Code.
Disclaimer: These regulations may not be the most recent version. Utah may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
