Utah Administrative Code
Topic - Environmental Quality
Title R309 - Drinking Water
Rule R309-530 - Facility Design and Operation: Alternate Surface Water Treatment Methods
Section R309-530-9 - New Treatment Processes or Equipment

Universal Citation: UT Admin Code R 309-530-9
Current through Bulletin 2024-06, March 15, 2024

The policy of the Board is to encourage, rather than to obstruct, the development of new methods and equipment for the treatment of water. Nevertheless, any new processes or equipment must have been thoroughly tested in full-scale, comparable installations, before approval of plans can be issued.

No new treatment process will be approved for use in Utah unless the designer or supplier can present evidence satisfactory to the Director that the process will ensure the delivery of water of safe, sanitary quality, without imposing undue problems of supervision, operation, or control.

The Director shall establish the turbidity limit for 95% of turbidity measurements and the maximum turbidity limit which shall not be exceeded. The plant effluent shall meet the requirements of Subsection R309-200-5(5)(a)(ii).

Disclaimer: These regulations may not be the most recent version. Utah may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.