Utah Administrative Code
Topic - Environmental Quality
Title R307 - Air Quality
Rule R307-354 - Automotive Refinishing Coatings
Section R307-354-5 - VOC Content Limits
Universal Citation: UT Admin Code R 307-354-5
Current through Bulletin 2024-06, March 15, 2024
No owner or operator shall apply coatings with a VOC content greater than the amounts specified in Table 1, unless the owner or operator uses an add-on Control device as specified in R307-354-7.
TABLE 1
AUTOMOTIVE REFINISHING VOC LIMITS (values in pounds of VOC per gallon of coating, minus water and exempt solvent (conpounds not defined as VOC in R307-101-2 ), as applied)
| Coating Category | VOC Content Limits (lb/gal) |
| Adhesion Promoter | 4.5 |
| Clear Coating | 2.1 |
| Col or Coating | 3.5 |
| Multi-color Coating | 5.7 |
| Pretreatment Coating | 5.5 |
| Primer | 2.1 |
| Primer Sealer | 2.1 |
| Single-stage Coating | 2.8 |
| Temporary Protective Coating | 0.5 |
| Truck Bed Liner Coating | 2.6 |
| Underbody Coating | 3.6 |
| Uniform Finish Coating | 4.5 |
| Any Other Coating Type | 2.1 |
Disclaimer: These regulations may not be the most recent version. Utah may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
