Utah Administrative Code
Topic - Environmental Quality
Title R307 - Air Quality
Rule R307-352 - Metal Container, Closure, and Coil Coatings
Section R307-352-5 - Work Practices

Universal Citation: UT Admin Code R 307-352-5

Current through Bulletin 2024-06, March 15, 2024

(1) The owner or operator shall:

(a) Store all VOC-containing coatings, thinners, and cleaning materials in closed containers;

(b) Minimize spills of VOC-containing coatings, thinners, and cleaning materials;

(c) Clean up spills immediately;

(d) Convey any coatings, thinners, and cleaning materials in closed containers or pipes;

(e) Close mixing vessels that contain VOC coatings and other materials except when specifically in use; and

(f) Minimize usage of solvents during cleaning of storage, mixing, and conveying equipment.

(2) No person shall apply any coating unless the coating application method has a transfer efficiency of at least 65%.

The following applications achieve a minimum of 65% transfer efficiency and shall be operated in accordance with the manufacturers specifications:

(a) Electrostatic application;

(b) Flow coat;

(c) Roll coat;

(d) Dip coat;

(e) High-volume, low-pressure (HVLP) spray;

(f) Hand application methods;

(g) Printing techniques; or

(h) Other application method capable of achieving at least 65% transfer efficiency, as certified by the manufacturer.

(3) Solvent cleaning operations shall be performed using cleaning materials having a VOC composite vapor pressure no greater than 1 mm Hg at 20 degrees Celsius, unless an add-on control device is used as specified in R307-352-6.

Disclaimer: These regulations may not be the most recent version. Utah may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.