Utah Administrative Code
Topic - Environmental Quality
Title R307 - Air Quality
Rule R307-349 - Flat Wood Paneling Coatings
Section R307-349-3 - Definitions

Universal Citation: UT Admin Code R 307-349-3
Current through Bulletin 2024-06, March 15, 2024

The following additional definitions apply to R307-349:

"As applied" means the VOC and solids content of the finishing material that is actually used for coating the substrate. It includes the contribution of materials used for in-house dilution of the finishing material.

"Finishing material" means a coating used in the flat wood panel industry, including basecoats, stains, washcoats, sealers, and topcoats.

"Flat wood paneling" means wood paneling products that are any decorative interior, exterior or tileboard (class I hardboard) panel to which a protective, decorative, or functional material or layer has been applied.

"Strippable booth coating" means a coating that is applied to a booth wall to provide a protective film to receive overspray during finishing and that is subsequently peeled and disposed. Strippable booth coatings are intended to reduce or eliminate the need to use organic solvents to clean booth walls.

Disclaimer: These regulations may not be the most recent version. Utah may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.