Utah Administrative Code
Topic - Environmental Quality
Title R307 - Air Quality
Rule R307-346 - Metal Furniture Surface Coatings
Section R307-346-7 - Add-On Controls Systems Operations
Universal Citation: UT Admin Code R 307-346-7
Current through Bulletin 2024-06, March 15, 2024
(1) If an add-on control system is used, the owner or operator shall install and maintain the add-on emission control system in accordance with the manufacturer recommendations and maintain 90% or greater capture and control efficiency. Determination of overall capture and control efficiency shall be determined using EPA approved methods, as follows.
(a) The capture efficiency of a VOC emission
control system's VOC collection device shall be determined according to EPA's
"Guidelines for Determining Capture Efficiency," January 9, 1995 and 40 CFR
Part 51, Appendix M, Methods 204-204F, as applicable.
(b) The control efficiency of a VOC emission
control system's VOC control device shall be determined using test methods in
Appendices A-1, A-6, and A-7 to 40 CFR Part 60, for measuring flow rates, total
gaseous organic concentrations, or emissions of exempt compounds, as
applicable.
(c) An alternative test
method may be substituted for the preceding test methods after review and
approval by the EPA Administrator.
Disclaimer: These regulations may not be the most recent version. Utah may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
