Utah Administrative Code
Topic - Environmental Quality
Title R307 - Air Quality
Rule R307-345 - Fabric and Vinyl Coatings
Section R307-345-3 - Definitions

The following additional definitions apply to R307-345:

"As applied" means the VOC and solids content of the finishing material that is actually used for coating the substrate. It includes the contribution of materials used for in-house dilution of the finishing material.

"Fabric coating" means the coating or saturation of a textile substrate with a knife, roll or rotogravure coater to impart characteristics that are not initially present, such as strength, stability, water or acid repellency, or appearance. Fabric coatings can include, but are not limited to, industrial and electrical tapes, tie cord, utility meter seals, imitation leathers, tarpaulins, shoe material, and upholstery fabrics.

"Knife coating" means the application of a coating material to a substrate by means of drawing the substrate beneath a blade that spreads the coating evenly over the width of the substrate.

"Roller coating" the coating material is applied to the moving fabric, in a direction opposite to the movement of the substrate, by hard rubber or steel rolls.

"Rotogravure coating" means the application of a uniform layer of material across the entire width of the web to substrate by means of a roll coating technique in which the pattern to be applied is etched on the coating roll. The coating material is picked up in these recessed areas and is transferred to the substrate.

"Vinyl coating" means applying a decorative or protective top coat, or printing on vinyl coated fabric or vinyl sheets.