Utah Administrative Code
Topic - Environmental Quality
Title R307 - Air Quality
Rule R307-343 - Wood Furniture Manufacturing Operations
Section R307-343-4 - VOC Content Limits
Universal Citation: UT Admin Code R 307-343-4
Current through Bulletin 2024-06, March 15, 2024
(1) No owner or operator shall apply coatings with a VOC content in excess of the amounts specified in Table 1, unless the owner or operator uses an add-on control device as specified in R307-343-6.
Table 1
WOOD MANUFACTURING COATING LIMITS
(values in pounds VOC per gallon of coating, minus water and exempt solvents (compounds not classified as VOC as defined in R307-101-2 ), as applied)
| Coating Category | VOC Content Limit (lb/gal) |
| Topcoat | 0.4 |
| Single component, non-catalyzed sealer | 0.9 |
| Single component, non-catalyzed topcoat | 0.9 |
| Acid -- cured single and 2 component sealer | 1.2 |
| Acid -- cured single and 2 component topcoat | 1.0 |
| 2 component polyurethane topcoat | 1.0 |
| 2 component polyurethane sealer | 1.0 |
| Cobalt peroxide cured polyester sealer/topcoat | 1.0 |
| Formaldehyde free acid catalyzed sealer/topcoat | 1.0 |
| Strippable spray booth coatings | 0.8 |
(2) The limits in Table 1 do not apply to canned aerosol coating products used exclusively for touch-up or repair.
Disclaimer: These regulations may not be the most recent version. Utah may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
