Utah Administrative Code
Topic - Environmental Quality
Title R307 - Air Quality
Rule R307-342 - Adhesives and Sealants
Section R307-342-8 - Add-On Controls Systems Operations
Current through Bulletin 2024-06, March 15, 2024
(1) The owner or operator shall install and maintain an incinerator, carbon adsorption, or any other add-on emission control system, provided that the emission control system is operated and maintained in accordance with the manufacturer recommendations in order to maintain at least 85% capture and control efficiency. Determination of overall capture and control efficiency shall be determined using EPA approved methods, as follows.
(2) The owner or operator of a control system shall provide documentation that the emission control system will attain the requirements of R307-342-8(1).
(3) The owner or operator shall maintain records of key system parameters necessary to ensure compliance with R307-342-8. Key system parameters may include, but are not limited to, temperature, pressure and flow rates. Operator inspection schedule, monitoring, recordkeeping, and key parameters shall be in accordance with the manufacturer's recommendations, and as required to demonstrate operations are providing continuous emission reduction from the source during all periods that the operations cause emissions from the source.
(4) The owner or operator shall maintain for a minimum of two years records of operating and maintenance sufficient to demonstrate that the equipment is being operated and maintained in accordance with the manufacturer recommendations.