Utah Administrative Code
Topic - Environmental Quality
Title R307 - Air Quality
Rule R307-341 - Ozone Nonattainment and Maintenance Areas: Cutback Asphalt
Section R307-341-4 - Limitations on Use of Cutback Asphalt

Universal Citation: UT Admin Code R 307-341-4

Current through Bulletin 2024-06, March 15, 2024

No person shall cause, allow, or permit the use or application of cutback asphalt, or emulsified asphalt containing more than 7 percent oil distillate, as determined by ASTM distillation test D-244, except as provided below:

(1) Where the use or application commences on or after October 1 of any year and such use or application is completed by April 30 of the following year;

(2) Where long-life (longer than 1 month) stockpile storage of patch mix is demonstrated to the director to be necessary;

(3) Where the asphalt is to be used solely as a penetrating prime coat;

(4) Where the user can demonstrate that there are no emissions of volatile organic compounds from the asphalt under conditions of normal use;

(5) Where the use or application is for the paving of parking lots smaller than 300 parking stalls.

Disclaimer: These regulations may not be the most recent version. Utah may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.