Utah Administrative Code
Topic - Corrections
Title R251 - Administration
Rule R251-708 - Perimeter Patrol
Section R251-708-3 - Policy

Universal Citation: UT Admin Code R 251-708-3

Current through Bulletin 2023-24, December 15, 2023

(1) The Department shall maintain perimeter patrols to:

(a) provide security;

(b) prevent escape;

(c) restrict access to Prison property;

(d) control visitor traffic;

(e) provide escape pursuit when necessary;

(f) maintain order; and

(g) prevent introduction of contraband.

(2) Perimeter patrols shall assist the facilitation of traffic through the secure perimeter at various access points by verifying the identity of persons at those points.

(3) Perimeter patrols shall:

(a) respond to all persons including hunters, walkers, joggers, off-road vehicle riders, and other vehicles on prison property or immediately adjacent areas;

(b) investigate any suspicious person or circumstance; and

(c) arrest or cite violators when required.

(4) Perimeter patrols may not allow non-prison personnel to wait in vehicles, in parking lots, or other areas of prison property.

(5) Perimeter patrols shall investigate unoccupied vehicles on or near the prison perimeter and may impound any vehicle which appears to present a security risk to the prison.

Amended by Utah State Bulletin Number 2023-22, effective 11/7/2023

Disclaimer: These regulations may not be the most recent version. Utah may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.