Utah Administrative Code
Topic - Commerce
Title R156 - Professional Licensing
Rule R156-55a - Utah Construction Trades Licensing Act Rule
Section R156-55a-308b - Natural Gas Technician Certification

Universal Citation: UT Admin Code R 156-55a-308b

Current through Bulletin 2024-18, September 15, 2024

(1) Under Subsection 58-55-308(1), the scope of practice in Subsection 58-55-308(2)(a) requiring certification is further defined as the installation, modification, maintenance, cleaning, repair or replacement of the gas piping, combustion air vents, exhaust venting system or derating of gas input for altitude of a residential or commercial gas appliance.

(2) An approved training program shall include the following course content:

(a) general gas appliance installation codes;

(b) venting requirements;

(c) combustion air requirements;

(d) gas line sizing codes;

(e) gas line approved materials requirements;

(f) gas line installation codes; and

(g) methods of derating gas appliances for elevation.

(3) Under Subsection 58-55-308(2)(c)(i), the following programs are approved to provide natural gas technician training, and to issue certificates or documentation of exemption from certification:

(a) Federal Bureau of Apprenticeship Training;

(b) Utah college apprenticeship program;

(c) trade union apprenticeship program;

(d) Rocky Mountain Gas Association; and

(e) Home Builders Association of Utah.

(4) Under Subsection 58-55-308(3), the approved programs in Subsections (3)(b) through (3) (e) shall require program participants to pass the RMGA Gas Appliance Installers Certification Exam, or equivalent exams approved by the Commission established or adopted by a training program, with a minimum passing score of 80%.

(5) Under Subsection 58-55-308(3), a person who has not completed an approved training program, but has passed the RMGA Gas Exam or approved equivalent exam established or adopted by an approved training program, with a minimum passing score of 80%, or the Utah licensed Journeyman or Residential Journeyman Plumber Exam, with a minimum passing score of 70%, is exempt from the certification requirement in Subsection 58-55-308(2)(c)(i).

(6) An approved program shall issue a certificate, including a wallet certificate, to each person who successfully completes the training program, with the following information:

(a) name of the program provider;

(b) name of the approved program;

(c) name of the certificate holder;

(d) date the certification was completed; and

(e) signature of an authorized representative of the program provider.

(7) The following shall constitute documentation of exemption from certification:

(a) certification of completion of training issued by the Federal Bureau of Apprenticeship Training;

(b) current Utah licensed Journeyman or Residential Journeyman plumber license; or

(c) certification from the RMGA or approved equivalent exam which shall include the following:
(i) name of the association, school, union, or other organization who administered the exam;

(ii) name of the person who passed the exam;

(iii) name of the exam;

(iv) date the exam was passed; and

(v) signature of an authorized representative of the test administrator.

(8) Each person engaged in the scope of practice defined in Subsection 58-55-308(2)(a) and Subsection (1), shall carry in their possession documentation of certification or exemption.

Disclaimer: These regulations may not be the most recent version. Utah may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.