Utah Administrative Code
Topic - Commerce
Title R156 - Professional Licensing
Rule R156-46a - Hearing Instrument Specialist Licensing Act Rule
Section R156-46a-502c - Calibration of Technical Instruments
Universal Citation: UT Admin Code R 156-46a-502c
Current through Bulletin 2024-24, December 15, 2024
The requirement in Subsection 58-46a-303(1)(b)(ii) for calibration of each appropriate technical instruments used in practice is defined as follows:
(1) each audiometer used in the fitting of hearing aids shall be calibrated when necessary, but not less than annually;
(2) the calibration shall include to ANSI standards calibration of frequency accuracy, acoustic output, attenuator linearity, and harmonic distortion; and
(3) calibration shall be accomplished by the manufacturer, or a properly trained person, or an institution of higher learning equipped with proper instruments for calibration of an audiometer.
Disclaimer: These regulations may not be the most recent version. Utah may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
