Utah Administrative Code
Topic - Agriculture and Food
Title R70 - Regulatory Services
Rule R70-910 - Registration of Servicepersons for Commercial Weighing and Measuring Devices
Section R70-910-9 - Place in Service Report
Universal Citation: UT Admin Code R 70-910-9
Current through Bulletin 2024-06, March 15, 2024
(1) The department shall make available to each registered serviceperson the Placed in Service Report form.
(2) A Placed in Service Report shall be submitted to the department by the serviceperson within 24 hours of when a rejected device is restored to service or of when a newly installed device is placed in service.
(3) Each official rejection tag or mark removed from the device shall be mailed to the Department of Agriculture and Food, the Division of Regulatory Services, Weights and Measures Program, 350 North Redwood Rd, PO Box 146500, Salt Lake City, UT 84114-6500.
(4) A duplicate copy of the report shall be retained by:
(a) the owner or operator of the
device; and
(b) the registered
serviceperson or their employer.
Disclaimer: These regulations may not be the most recent version. Utah may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
