Utah Administrative Code
Topic - Agriculture and Food
Title R70 - Regulatory Services
Rule R70-910 - Registration of Servicepersons for Commercial Weighing and Measuring Devices
Section R70-910-11 - Security Seals Required to be Submitted

Universal Citation: UT Admin Code R 70-910-11

Current through Bulletin 2024-06, March 15, 2024

(1) A registered serviceperson shall submit to the department the seal that they will use.

If the seal belongs to the registered serviceperson's employer, the serviceperson shall identify the employer.

(2) When a registered serviceperson changes their seal, they shall submit the seal and their employer's identification to the department prior to it being used.

(3) A registered serviceperson who uses their own seal shall submit that seal to the department.

(4) When a registered serviceperson changes their own seal, they shall submit the seal to the department prior to it being used.

Disclaimer: These regulations may not be the most recent version. Utah may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.