Utah Administrative Code
Topic - Agriculture and Food
Title R70 - Regulatory Services
Rule R70-101 - Bedding, Upholstered Furniture and Quilted Clothing
Section R70-101-14 - Second Hand Tag and Tagging Requirements for Repaired, Reupholstered, and Renovated Products
Universal Citation: UT Admin Code R 70-101-14
Current through Bulletin 2024-06, March 15, 2024
(1) A tag for a repaired, reupholstered, and renovated product shall be:
(a) a minimum of two inches by three
inches;
(b) yellow on both sides of
the tag;
(c) made of material that
cannot be easily torn;
(d) have the
required information printed on one side of the tag with the opposite side
remaining blank;
(e) printed in
English;
(f) printed in black
ink;
(g) printed clearly and
legibly; and
(h) firmly attached to
the article.
(2) A second hand tag shall contain the following information, in order:
(a) the phrase, "UNDER PENALTY OF LAW THIS
TAG NOT TO BE REMOVED EXCEPT BY THE CONSUMER" in bold at the top of the label
in capital letters, no less than 1/8 inch in height;
(b) the phrase, "THIS ARTICLE IS NOT FOR SALE
OWNER'S MATERIAL" in bold in capital letters, no less than 1/8 inch in
height;
(c) the phrase,
"CERTIFICATION IS MADE THAT THIS ARTICLE CONTAINS THE SAME MATERIAL IT DID WHEN
RECEIVED FROM THE OWNER AND THAT ADDED MATERIALS ARE DESCRIBED IN THE
ACCORDANCE WITH LAW, AND CONSIST OF THE FOLLOWING:" followed by a description
of the filling material;
(d) a
description of the work that was done on the product;
(e) the URN number;
(f) the name and address of the renovator or
repairer; and
(g) the date of
pick-up, owner's name, and address.
Disclaimer: These regulations may not be the most recent version. Utah may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
