Utah Administrative Code
Topic - Agriculture and Food
Title R70 - Regulatory Services
Rule R70-101 - Bedding, Upholstered Furniture and Quilted Clothing
Section R70-101-13 - Second Hand Law Tags and Tagging Requirements
Universal Citation: UT Admin Code R 70-101-13
Current through Bulletin 2024-06, March 15, 2024
(1) A tag for second hand material shall be:
(a) a minimum
of two inches by three inches;
(b)
yellow on both sides of the tag;
(c) made of material that cannot be easily
torn;
(d) printed in
English;
(e) printed in black
ink;
(f) printed clearly and
legibly; and
(g) firmly attached to
the article.
(2) Required information shall be printed on one side of the tag with the opposite side remaining blank.
(3) A second hand tag shall contain the following information, in order:
(a) the phrase "UNDER PENALTY OF LAW THIS TAG
NOT TO BE REMOVED EXCEPT BY THE CONSUMER" in bold at the top of the label in
capital letters, no less than 1/8 inch in height;
(b) the phrase, "THIS ARTICLE CONTAINS SECOND
HAND MATERIAL CONSISTING OF CONTENTS UNKNOWN". The words "SECONDHAND MATERIAL"
and "CONTENTS UNKNOWN" shall be in capital letters, size not less than 1/8
inches in height;
(c) the phrase,
"Certification is made that the materials in this article are described in
accordance with law"; and
(d) the
store name and complete corporate address.
(4) The tag shall be easily accessible to the consumer for examination.
(5) No mark, label, printed matter, illustration, sticker, or any other device shall be placed upon the tag.
Disclaimer: These regulations may not be the most recent version. Utah may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
