Utah Administrative Code
Topic - Agriculture and Food
Title R68 - Plant Industry
Rule R68-6 - Utah Nursery Rule
Section R68-6-3 - Labeling

Universal Citation: UT Admin Code R 68-6-3

Current through Bulletin 2024-06, March 15, 2024

(1) To identify nursery stock properly, when it is shipped, delivered, or transported to any purchaser, at least one label bearing the name, origin state grown or propagated, size, variety, and grade where applicable shall be attached to each separate species or variety.

(2) When a grade or size designation is used or implied in labeling or in an advertisement referring to a kind of nursery stock for which grades or sizes have been established in this rule, the nursery stock shall conform to the specifications of the particular grade or size. Advertisements of stock offered for sale in containers shall state plant grade or size, irrespective of the size of the container.

(3) Non-established container stock shall be identified by a water-resistant tag on which the words "non-established container stock" are printed.

(a) The tags shall be not less than 2 x 4 inches in size with lettering of 24-point Gothic type.

(b) The minimum length of time the stock has been planted in the container or the date the stock was planted in the container shall also be stated on the tag.

(c) The tag shall bear only the required labeling. It shall be the responsibility of the supplier of non-established container stock to adequately label stock as provided in this rule.

(4) Each rose shall be labeled by grade for individual plants, bundles, or single lots.

Disclaimer: These regulations may not be the most recent version. Utah may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.