Utah Administrative Code
Topic - Agriculture and Food
Title R68 - Plant Industry
Rule R68-5 - Grain Inspection
Section R68-5-4 - Utah Standards for Safflower

Universal Citation: UT Admin Code R 68-5-4

Current through Bulletin 2024-06, March 15, 2024

(1) Moisture Testing.

(a) Basis of determination.
(i) A moisture determination shall be made on a representative portion from the representative sample, before the removal of foreign material or dockage, by testing exactly 225 grams of safflower seed product.

(b) Certification.
(i) The percentages of moisture content shall be reported on the pan ticket and the inspection certificate, and shall be expressed in whole and tenths of a percent, rounded to the nearest tenth percent.

(2) Dockage.

(a) Any matter other than whole safflower seed that can be removed from a test portion of the original sample, shall be removed by the use of an approved device, and also by handpicking a portion of the machine cleaned sample to remove any remaining material other than safflower and other grains.

(b) Basis of determination.
(i) A dockage determination test shall be made using about 750-850 grams or 1 1/8 to 1 1/2 quarts cut from the original sample.

(ii) The person making the test shall first determine the mechanically separated dockage. This involves a separation procedure using a Carter Dockage Tester.

(iii) An arbitrarily handpicked portion of about 75 grams shall be cut from the mechanically cleaned safflower seed.

(c) The following process shall be used to determine dockage with the Carter Dockage Tester;
(i) the air control shall be set at number 9, wide open;

(ii) the feed control shall be set at number 6;

(iii) in the Riddle Carriage, the plastic seed riddle, part number 35898, shall be used;

(iv) a number 2 sieve shall be used in the top sieve carriage; and

(v) if there is a sieve in the middle or the bottom sieve carriage, it shall NOT be used.

(d) Dockage will consist of:
(i) any material removed by the aspirator, air collecting pan;

(ii) coarse material, except whole safflower seed that passed over the riddle, riddle collecting pan. Whole kernels of safflower seed that passed over the riddle shall be returned to the cleaned sample;

(iii) any material that passed through the number 2 sieve, bottom collecting pan; and

(iv) any material other than safflower seed and other grains removed by handpicking a machine cleaned portion of about 75 grams.

(e) Certification.
(i) The percentage of dockage shall be reported on the pan ticket and the inspection certificate. The percent of dockage shall be stated in terms of whole or half percentages.

(3) Test weight per bushel.

(a) Basis of determination.
(i) A test weight per bushel shall be performed on a representative portion ranging in size from 1 to 1 1/2 quarts or 750-850 grams after the removal of the mechanically separated dockage.

(b) Certification.
(i) The test weight per bushel shall be reported on the sample pan ticket and the inspection certificate in whole and half pounds.

(4) Hulls.

(a) Hulls shall have less than 1/3 of the kernels attached.

(b) Basis of determination.

A determination for testing the percentage of kernels attached to hulls shall be performed using about 30 grams cut from the work portion after the removal of dockage.

(c) Certification.

The percentage of kernels attached to hulls shall be reported on the pan ticket and the inspection certificate, and shall be expressed to the nearest tenth percent.

(5) Dehulled kernels and broken seed.

(a) Dehulled kernels and broken seed shall consist of safflower or pieces of seed in which the hull has been removed from safflower seeds that have at least 1/3 of the kernels attached, and also when safflower seeds that have been so broken that the kernel has been exposed.

(b) Basis of determination.

A determination of dehulled and broken seed will be reported on the pan ticket and the inspection certificate to the nearest tenth percent.

(c) Certification.

The percentage of dehulled and broken seed will be reported on the pan ticket and the inspection certificate to the nearest tenth percent.

(6) Other grains.

(a) Other grains shall consist of any other grain or domestic kernels which are not removed in the dockage.

(b) Basis of determination.

A test to determine the percentage of other grains present in the product, will be performed on about 30 grams cut from the work sample after the removal of dockage.

(c) Certification.

The percentage of other grains will be reported on the pan ticket and the inspection certificate to the nearest tenth percent.

(7) Damaged and heat damaged safflower seed.

(a) Amounts of damaged safflower total kernels and pieces of kernels that are heat damaged, sprout damaged, frost damaged, green or otherwise materially damaged shall be assessed.

(b) Basis of determination.

A test to determine the percentage of damaged and heat damaged safflower kernels will be performed using about 30 grams cut from the work portion after the removal of dockage.

(c) Certification.

The total percentage of heat damaged safflower seed and damaged safflower seed shall be reported on the pan ticket and the inspection certificate, and shown to the nearest tenth percent.

(8) Split damage.

(a) A check for split damage in safflower seed shall be conducted noting any break, fissure, crack, or tear in the seed kernels, husk or cover.

(b) Basis of determination.

A test to determine the percent of split, damaged safflower kernels will be performed on about 30 grams cut from the work portion after the removal of dockage.

(c) Certification.

The percentage of split damaged safflower seeds shall be reported in the split section and included in the damaged safflower section on the inspection certificate, and shown to the nearest tenth percent.

(9) Safflower seed claiming a UTAH grade shall meet the requirements in the following table:

TABLE

Utah Safflower Seed Grade Requirements

Grade

Utah 1

Utah 2

Utah 3

Sample Grade

Minimum Limit

Test wt. per bushel

40 lbs.

38 lbs.

35 lbs.

*

Maximum Limit

Stones per 100 grams

2

6

6

*

Hulls

1 2 5

*

Dehulled Kernels and Broken Seed

2

2 0.5

4

5 2

8

8 3

*

Splits

*

Other Grains

*

Damaged Safflower Seeds

Sprout

1 0 3

2

0.2

5

4 1 5

*

Heat

*

Total

*

*Sample grade safflower shall consist of a safflower seed group which:

(a) does not meet the requirements of grade Utah 1 through Utah 3;

(b) in about a 750-850 gram sample, contains seven or more stones;

(c) has a musty, sour, or commercially objectionable foreign odor; or

(d) contains more than 2.5% of earth pellets after the mechanical separation of dockage.

NOTE: Slightly or badly weather stained safflower seed may not be rated higher than grade Utah 2 or Utah 3 under this rule.

Disclaimer: These regulations may not be the most recent version. Utah may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.