Utah Administrative Code
Topic - Agriculture and Food
Title R68 - Plant Industry
Rule R68-29 - Quality Assurance Testing on Cannabis
Section R68-29-4 - Sampling Cannabis and Cannabis Products

Universal Citation: UT Admin Code R 68-29-4

Current through Bulletin 2024-06, March 15, 2024

(1) The entity that requests testing of a cannabis plant product lot, cannabis concentrate batch, or cannabis product batch shall make the entirety of the lot or batch available to the sampling technician.

(2) The lot or batch being sampled shall be contained in a single location and physically separated from other lots or batches.

(3) The sample shall be collected by a sampling technician who is unaffiliated with the entity that requested testing of the cannabis lot or cannabis product batch unless an exception is granted by the department.

(4) The owner of the cannabis lot or cannabis product batch and any of their employees may not assist in the selection of the sample.

(5) The sampling technician shall collect the representative sample in a manner set forth in a SOP, that is ISO 17025 compliant, maintained by the laboratory that will perform the testing.

(6) When collecting the representative sample, the sampling technician shall:

(a) use sterile gloves, instruments, and a glass or plastic container to collect the sample;

(b) place tamper proof tape on the container; and

(c) appropriately label the sample pursuant to Section R68-30-6.

(7) For cannabis plant product lots, the sampling technician shall take a minimum representative sample according to the following schedule:

(a) 10 subunits with an average weight of one gram each for lots weighing 5 kilograms or less;

(b) 16 subunits with an average weight of one gram each for lots weighing 5.01-9 kilograms;

(c) 22 subunits with an average weight of one gram each for lots weighing 9.01-14 kilograms;

(d) 28 subunits with an average weight of one gram each for lots weighing 14.01-18 kilograms;

(e) 32 subunits with an average weight of one gram each for lots weighing 18.01-23 kilograms.

(8) For cannabis concentrate, the sampling technician shall take a minimum representative sample according to the following schedule:

(a) 10 mL or grams for batches of one liter or kilogram or less; or

(b) 20 mL or grams for batches of four liters or kilograms or less.

(9) For cannabis products in their final product form, the sampling technician shall take the following minimum number of sample units, the combined total weight of which must be at least 10 grams, not including packaging materials:

(a) four units for a sample product batch with 5-500 products;

(b) six units for a sample product batch with 501-1000 products;

(c) eight units for a sample product batch with 1,001-5,000 products; and

(d) ten units for a sample product batch with 5,001-10,000 products.

(10) Additional material may be included in the representative sample if the material is necessary to perform the required testing.

Disclaimer: These regulations may not be the most recent version. Utah may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.