Texas Administrative Code
Title 43 - TRANSPORTATION
Part 10 - TEXAS DEPARTMENT OF MOTOR VEHICLES
Chapter 215 - MOTOR VEHICLE DISTRIBUTION
Subchapter D - GENERAL DISTINGUISHING NUMBERS AND IN-TRANSIT LICENSES
Section 215.153 - Specifications for All Temporary Tags

Universal Citation: 43 TX Admin Code ยง 215.153

Current through Reg. 49, No. 38; September 20, 2024

(a) Information printed or completed on a temporary tag must be in black ink on a white background. Other than for a motorcycle, a completed buyer's, dealer's, converter's, or preprinted Internet-down temporary tag shall be six inches high and at least eleven inches wide. For a motorcycle, the completed buyer's, dealer's, converter's, or preprinted Internet-down temporary tag shall be four inches high and at least seven inches wide.

(b) A temporary tag must be:

(1) composed of plastic or other durable, weather-resistant material; or

(2) sealed in a two mil clear poly bag that encloses the entire temporary tag.

(c) A temporary tag may only be issued and printed from the department's temporary tag database as described in § 215.152 of this title (relating to Obtaining Numbers for Issuance of Temporary Tags) and § 215.157 of this title (relating to Advance Numbers, Preprinted Internet-down Temporary Tags).

Disclaimer: These regulations may not be the most recent version. Texas may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.