Texas Administrative Code
Title 43 - TRANSPORTATION
Part 10 - TEXAS DEPARTMENT OF MOTOR VEHICLES
Chapter 215 - MOTOR VEHICLE DISTRIBUTION
Subchapter C - FRANCHISED DEALERS, MANUFACTURERS, DISTRIBUTORS, AND CONVERTERS
Section 215.120 - Standard License Plates
Current through Reg. 49, No. 38; September 20, 2024
(a) A manufacturer, distributor, or converter may apply for a manufacturer or converter standard license plate for use on a new unregistered vehicle of the same vehicle type assembled or modified in accordance with Transportation Code § 503.064 or § 503.0618, as applicable:
(b) A manufacturer may use a manufacturer's standard license plate to test a prototype motor vehicle on a public street or highway including a commercial motor vehicle prototype designed to carry a load. A manufacturer's standard license plate may not be used on a commercial motor vehicle prototype or new commercial motor vehicle to carry a load for which the manufacturer or other person receives compensation.
(c) A manufacturer, distributor, or converter shall attach a standard license plate to the rear of a vehicle in accordance with § 217.27 of this title (relating to Vehicle Registration Insignia).
(d) A manufacturer, distributor, or converter shall maintain a record of each standard license plate issued to the manufacturer, distributor, or converter by the department. The license plate record must contain:
(e) If a manufacturer, distributor, or converter cannot account for a standard license plate or a standard license plate is damaged, the manufacturer, distributor, or converter shall:
(f) A standard license plate is no longer valid for use after the manufacturer, distributor, or converter reports to the department that the license plate is lost, stolen, or damaged. A manufacturer, distributor, or converter must render a void license plate unusable by permanently marking the front of the plate with the word "VOID" or a large "X" and once marked, shall destroy or recycle the license plate, or return the license plate to the department within 10 days.
(g) The license holder's license plate record must be available for inspection and copying by the department during normal business hours or be available to submit electronically to the department upon request.
(h) In evaluating requests for additional standard license plates, the department shall consider the business justification provided by a license holder including the following:
(i) a license holder shall return a department-issued license plate to the department within 10 days of the license holder closing the associated license or the associated license being revoked, canceled, or closed by the department.