Texas Administrative Code
Title 30 - ENVIRONMENTAL QUALITY
Part 1 - TEXAS COMMISSION ON ENVIRONMENTAL QUALITY
Chapter 328 - WASTE MINIMIZATION AND RECYCLING
Subchapter H - SYMBOLS FOR CERTAIN PLASTIC CONTAINERS
Section 328.122 - Definitions of Terms
Universal Citation: 30 TX Admin Code § 328.122
Current through Reg. 50, No. 13; March 28, 2025
The following words and terms, when used in this subchapter shall have the following meanings, unless the context clearly indicates otherwise.
(1) Plastic--A material made of polymeric organic compounds and additives that can be shaped by flow.
(2) Plastic bottle--A plastic container that:
(A) has a neck smaller than the body of the container;
(B) is designed for a screw top, snap cap, or other closure; and
(C) has a capacity of not less than 16 fluid ounces or more than five gallons.
(3) Rigid plastic container--A formed or molded container, other than a plastic bottle, that:
(A) is intended for single use;
(B) is composed predominantly of plastic resin;
(C) has a relatively inflexible finite shape or form; and
(D) has a capacity of not less than eight ounces or more than five gallons.
Disclaimer: These regulations may not be the most recent version. Texas may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
