Texas Administrative Code
Title 30 - ENVIRONMENTAL QUALITY
Part 1 - TEXAS COMMISSION ON ENVIRONMENTAL QUALITY
Chapter 30 - OCCUPATIONAL LICENSES AND REGISTRATIONS
Subchapter I - UNDERGROUND STORAGE TANK ON-SITE SUPERVISOR LICENSING AND CONTRACTOR REGISTRATION
Section 30.310 - Qualifications for Initial License
Universal Citation: 30 TX Admin Code § 30.310
Current through Reg. 50, No. 13; March 28, 2025
(a) An individual applying for an on-site supervisor license must apply for one of the following levels of licenses:
(1) Class
A;
(2) Class B; or
(3) Class A/B combination.
(b) To obtain an on-site supervisor license, an individual must:
(1)
have met the requirements in Subchapter A of this chapter (relating to
Administration of Occupational Licenses and Registrations);
(2) be at least 18 years of age;
(3) document at least two years of active
experience in installation, repair, or removal of underground storage tanks
(USTs), underground utilities, or other engineering construction;
(4) submit sworn statements, on forms
approved by the executive director, from at least four persons (three from
clients not related by blood or marriage and one from a current or previous
employer, or employer's representative) who have engaged the applicant or the
applicant's employer within the previous 24 months to perform: UST
installations, repairs, or removals; underground utility construction; or
engineering construction. These statements shall attest to the applicant's
character, knowledge of construction, and ability to supervise the construction
activity. Such statements shall also include a description of the type of
construction performed by the applicant;
(5) submit a sworn statement by the applicant
as to the authenticity of the information provided on the
application;
(6) prior to the
examination, submit the appropriate certificates of completion for the
following levels of licenses:
(A) Class A--28
hours of training and education courses in the installation and repair of
USTs;
(B) Class B--12 hours of
training and education courses in the removal of USTs; or
(C) Class A/B combination--40 hours of
training and education courses in the installation, repair, and removal of
USTs; and
(7) pass the
appropriate licensing examination.
(c) Individuals with a Class A or Class B may upgrade to a Class A/B combination by submitting a new application with the required fee, completing the required initial training, and passing the examination.
Disclaimer: These regulations may not be the most recent version. Texas may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.