Texas Administrative Code
Title 30 - ENVIRONMENTAL QUALITY
Part 1 - TEXAS COMMISSION ON ENVIRONMENTAL QUALITY
Chapter 299 - DAMS AND RESERVOIRS
Subchapter C - CONSTRUCTION REQUIREMENTS
Section 299.31 - Permanent Reference Mark

Universal Citation: 30 TX Admin Code § 299.31
Current through Reg. 50, No. 13; March 28, 2025

The owner of a proposed dam or a dam proposed to be reconstructed, modified, enlarged, rehabilitated, altered, or repaired shall have the professional engineer of record establish one or more permanent reference mark(s) for future use near, but separate from, the project. Accurate location(s) and elevation(s) above mean sea level for the permanent reference mark(s) must be shown on the record drawings. Horizontal and vertical measurements recorded with a global positioning system (GPS) receiver must be based on the North American Datum of 1983 and the North American Vertical Datum of 1988 horizontal and vertical reference datums. Elevation data must be recorded using a survey instrument or survey grade GPS receiver. Latitude and longitude measurements must be provided in decimal degrees to six decimal places.

Disclaimer: These regulations may not be the most recent version. Texas may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.