Texas Administrative Code
Title 30 - ENVIRONMENTAL QUALITY
Part 1 - TEXAS COMMISSION ON ENVIRONMENTAL QUALITY
Chapter 230 - GROUNDWATER AVAILABILITY CERTIFICATIONS FOR PLATTING
Section 230.7 - General Groundwater Resource Information
Universal Citation: 30 TX Admin Code § 230.7
Current through Reg. 49, No. 52; December 27, 2024
(a) Aquifer identification. Using Texas Water Development Board aquifer names, the aquifer(s) underlying the proposed subdivision which is planned to be used as the source of water for the subdivision must be identified and generally described.
(b) Geologic and groundwater information. To meet the requirements of this chapter, the following geologic and groundwater information must be considered in planning and designing the aquifer test:
(1) the
stratigraphy of the geologic formations underlying the subdivision;
(2) the lithology of the geologic
strata;
(3) the geologic
structure;
(4) the characteristics
of the aquifer(s) and their hydraulic relationships;
(5) the recharge to the aquifer(s), and
movement and discharge of groundwater from the aquifer(s); and
(6) the ambient quality of water in the
aquifer(s).
Disclaimer: These regulations may not be the most recent version. Texas may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
