Texas Administrative Code
Title 30 - ENVIRONMENTAL QUALITY
Part 1 - TEXAS COMMISSION ON ENVIRONMENTAL QUALITY
Chapter 113 - STANDARDS OF PERFORMANCE FOR HAZARDOUS AIR POLLUTANTS AND FOR DESIGNATED FACILITIES AND POLLUTANTS
Subchapter D - DESIGNATED FACILITIES AND POLLUTANTS
Division 3 - EMISSION GUIDELINES AND COMPLIANCE TIMES FOR SMALL MUNICIPAL WASTE COMBUSTION UNITS CONSTRUCTED ON OR BEFORE AUGUST 30, 1999
Section 113.2153 - What records must I keep for stack tests?

Universal Citation: 30 TX Admin Code § 113.2153

Current through Reg. 50, No. 13; March 28, 2025

For stack tests required under § 113.2139 of this title (relating to What types of stack tests must I conduct?), you must keep records of four items:

(1) The results of the stack tests for eight pollutants or parameters recorded in the appropriate units of measure specified in Table 2 or 4 in § 113.2174 of this title (relating to Tables Relating to Division 3):

(A) Dioxins/furans.

(B) Cadmium.

(C) Lead.

(D) Mercury.

(E) Opacity.

(F) Particulate matter.

(G) Hydrogen chloride.

(H) Fugitive ash.

(2) Test reports including supporting calculations that document the results of all stack tests.

(3) The maximum demonstrated load of your municipal waste combustion units and maximum temperature at the inlet of your particulate matter control device during all stack tests for dioxins/furans emissions.

(4) The calendar date of each record.

Disclaimer: These regulations may not be the most recent version. Texas may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.