Texas Administrative Code
Title 30 - ENVIRONMENTAL QUALITY
Part 1 - TEXAS COMMISSION ON ENVIRONMENTAL QUALITY
Chapter 106 - PERMITS BY RULE
Subchapter Q - PLASTICS AND RUBBER
Section 106.395 - Equipment for Mixing Plastic and Rubber (No Solvent)

Universal Citation: 30 TX Admin Code § 106.395

Current through Reg. 49, No. 52; December 27, 2024

Mixers, blenders, roll mills, or calenders for rubber or plastics are permitted by rule, provided the following conditions of this section are satisfied. Mixers, blenders, roll mills, or calenders handling or adding asbestos shall not be eligible to be permitted by rule under this section.

(1) Organic solvents, diluents, or thinners shall not be used.

(2) Material in powder form shall not be added unless the mixer, blender, roll mill, or calender is vented to a fabric filter having a maximum filtering velocity of 4.0 feet per minute (ft/min) with mechanical cleaning, or 7.0 ft/min with automatic air cleaning.

(3) There shall be no visible emissions.

Disclaimer: These regulations may not be the most recent version. Texas may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.