Texas Administrative Code
Title 28 - INSURANCE
Part 1 - TEXAS DEPARTMENT OF INSURANCE
Chapter 34 - STATE FIRE MARSHAL
Subchapter F - FIRE ALARM RULES
Section 34.620 - Installation Labels
Current through Reg. 50, No. 13; March 28, 2025
(a) After the completion of an installation of new fire alarm equipment or a new system, or the extension, alteration, or modification to a fire alarm system already in place, an installation label must be affixed to the inside of the control panel cover or, if the system has no panel, in a permanent location. Yellow or red labels must not be attached for the installation of a new system or new equipment used in the extension, alteration, or modification to an existing fire alarm system.
(b) Installation labels must be white with black lettering.
(c) Installation labels must be approximately three inches in height and approximately three inches in width and must have an adhesive on the back.
(d) Installation labels must contain the following information in the format of the label as indicated in subsection (e) of this section:
(e) Installation label: