Texas Administrative Code
Title 26 - HEALTH AND HUMAN SERVICES
Part 1 - HEALTH AND HUMAN SERVICES COMMISSION
Chapter 748 - MINIMUM STANDARDS FOR GENERAL RESIDENTIAL OPERATIONS
Subchapter O - SAFETY AND EMERGENCY PRACTICES
Division 5 - CARBON MONOXIDE SAFETY PRACTICES
Section 748.3193 - How must carbon monoxide detectors be installed?
Universal Citation: 26 TX Admin Code ยง 748.3193
Current through Reg. 49, No. 38; September 20, 2024
(a) You must install carbon monoxide detectors that meet Underwriters Laboratories Inc. requirements (UL-Listed).
(1) You must install carbon monoxide
detectors according to manufacturer's specifications for proper location and
installation; and
(2) Furniture,
draperies, or other items must not cover up detectors.
(b) If you use an electronic carbon monoxide detection-system connected to an alarm/smoke detection system, the system must be installed according to the state or local fire inspector's requirements.
Disclaimer: These regulations may not be the most recent version. Texas may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
