Texas Administrative Code
Title 26 - HEALTH AND HUMAN SERVICES
Part 1 - HEALTH AND HUMAN SERVICES COMMISSION
Chapter 746 - MINIMUM STANDARDS FOR CHILD-CARE CENTERS
Subchapter U - INDOOR AND OUTDOOR ACTIVE PLAY SPACE AND EQUIPMENT
Division 5 - SURFACING
Section 746.4907 - How should outdoor loose-fill surfacing materials be installed?
Universal Citation: 26 TX Admin Code ยง 746.4907
Current through Reg. 49, No. 38; September 20, 2024
(a) You must install and maintain loose-fill surfacing materials to a depth of:
(1) At least six inches when the height of
the highest designated play surface is five feet or less; and
(2) At least nine inches when the height of
the highest designated play surface is greater than five feet.
(b) You must not install loose-fill surfacing materials over concrete or asphalt.
(c) You must mark all equipment support posts to indicate the depth at which the loose-fill surfacing material must be maintained under and around the equipment.
(d) You must ensure the loose-fill materials are maintained at the proper depth at all times.
(e) Loose-fill surfacing materials must not be used indoors.
Disclaimer: These regulations may not be the most recent version. Texas may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
