Texas Administrative Code
Title 22 - EXAMINING BOARDS
Part 8 - TEXAS APPRAISER LICENSING AND CERTIFICATION BOARD
Chapter 159 - RULES RELATING TO THE PROVISIONS OF THE TEXAS APPRAISAL MANAGEMENT COMPANY REGISTRATION AND REGULATION ACT
Section 159.109 - Inactive Status

Universal Citation: 22 TX Admin Code ยง 159.109

Current through Reg. 49, No. 38; September 20, 2024

(a) To elect to be placed on inactive status, a license holder must do the following:

(1) file a request for inactive status on a form approved by the Board; and

(2) confirm in writing to the Board that the license holder has given written notice of its election to go inactive to all appraisers listed on the license holder's appraiser panel at least 30 days prior to filing the request for inactive status.

(b) In order to return from inactive status to active status, a license holder must submit to the Board a completed Request for Active Status form and proof of compliance with all outstanding requirements for active registration.

(c) A license holder that has elected or been placed on inactive status may not engage in any activity for which registration is required until an active registration has been issued by the Board.

(d) The appraiser panel of a license holder on inactive status will remain in place.

(e) A license holder may renew on inactive status. To renew on inactive status, a license holder must satisfy:

(1) all requirements under subsection (a) of this section; and

(2) all renewal requirements for an active registration under § 159.108 of this chapter.

Disclaimer: These regulations may not be the most recent version. Texas may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.